home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Hardcore Gamer Resource Kit
/
Hardcore Gamer Resource Kit - Disc 2.iso
/
Pc
/
U_Z
/
WC3JOYNG.ZIP
/
README.TXT
next >
Wrap
Text File
|
1995-05-04
|
4KB
|
96 lines
WC3JOY.DLL Joystick Patch for Notebook Gameport
(C) 1995, Origin Systems, Inc.
Written May, 1995 by Anthony L. Sommers (support@origin.ea.com)
DISCLAIMER : Origin Systems, Inc. shall not be responsible for the
usage of this patch, in whole or in part. In no event will Origin
Systems, Inc. or the author of this patch be liable for any damages
resulting from the use or misuse of this patch. Use at your own risk.
The document included with this patch may not be reproduced in any
manner without the written consent of the author.
About WC3JOY.DLL
----------------
WC3JOY.DLL is a set of alternate joystick routines used to provide
support for Colorado Spectrum's Notebook Gameport. Joysticks
tested with the Notebook Gameport in combination with this patch
include the CH Flightstick, the CH Flightstick Pro, the Thrustmaster
FCS, and the Gravis Analog Pro.
+-----------------------------------------------------------------+
| |
| NOTE : THIS PATCH MAY NOT WORK FOR YOU! This patch assumes |
| the Notebook Gameport is in perfect working condition before |
| use. In the event the game locks up during detection or |
| cannot detect the Notebook Gameport, please consult the |
| Notebook Gameport's documentation or Colorado Spectrum |
| for troubleshooting instructions. |
| |
+-----------------------------------------------------------------+
Installation of WC3JOY.DLL
--------------------------
1) Change to the directory where WC3JOYNG.EXE was extracted.
2) Copy the WC3JOY.DLL file to the C:\WC3 directory, i.e. :
COPY WC3JOY.DLL C:\WC3 [ENTER]
3) Run Wing Commander III. You should see a brief message stating
whether or not the Notebook Gameport was detected, and whether
or not the patch was installed.
4) Once you're into the game, your joystick may drift. This is
due to the fact that alternate joystick routines are being
used rather than the ones used when you initially installed
the game. Simply recalibrate by selecting Calibrate Joystick
in the Main Terminal, or press [ALT-J] in gameflow or [ALT-C]
in space flight. Everything should be working normally.
5) Once you're in space flight, you can choose your type of
joystick in the Spaceflight Options menu [ALT-O]. This
will allow you to use more functional joystick such as the
CH Flightstick Pro, the Thrustmaster FCS, or the Logitech
Wingman.
*NOTE : The hat on the Thrustmaster FCS or the Logitech
Wingman Extreme will not work with this patch, although
you can use the joystick and its extra buttons.
Uninstallation of WC3JOY.DLL
----------------------------
To remove this patch, just type :
DEL C:\WC3\WC3JOY.DLL [ENTER]
Notes
-----
* You MUST have a working Notebook Gameport to use this patch.
If the joystick is unplugged, if there is a joystick port
conflict, or if the joystick or port is faulty, you may not
be able to successfully use this patch.
* If you are using a computer that has the ACER BIOS, attempting
to use this patch with Wing Commander III without NG.EXE
installed will cause a lockup. Simply install NG.EXE before
attempting to run Wing Commander III.
* Check out the WC3 Technical Help File (WC3HELP.TXT) on our
BBS (512-331-4446) or the Internet (ftp.ea.com
/pub/patches/wc3help.txt)!
* Thanks to Jason Yenawine at Origin Systems, Inc. and
Ken Hall and Dayle Towers at Colorado Spectrum.
-- END OF FILE